Alvins Cables D-tap to USB-C PD Bidirectional Cable (100W 24cm)
Product Description
The Alvin's Cables D-Tap to USB-C PD Bidirectional Charger Cable is a 24 cm two-way power lead for filmmakers and content creators who run V-mount or Gold-mount batteries and want to power USB-C gear from those batteries, or top the batteries back up from a USB-C source.
The cable is short and purposeful, with a D-tap plug on one end that clicks into a battery plate and a USB-C plug on the other. It coils neatly on a belt or in a pouch, and both connectors seat with a firm, positive fit so power stays connected as you move around a set.
Ideal for: Filmmakers, camera operators, and content creators using V-mount or Gold-mount batteries to power a camera, monitor, laptop, or phone, or to recharge those batteries from a USB-C PD power bank or wall adapter.
On a long shoot you often have a large V-mount or Gold-mount battery on the rig but a growing pile of USB-C devices to keep alive, and separate chargers for each mean more kit to carry. This cable answers that by moving power both ways over a single lead, so the battery can run your USB-C gear during the day and be recharged from a USB-C bank or outlet afterwards. The result is one cable that keeps a mixed kit powered from the batteries you already carry.
Key Features
- Bidirectional power: Power flows either way between D-tap and USB-C, so the same cable runs a camera, monitor, laptop, or phone from a V-mount or Gold-mount battery, then recharges that battery from a USB-C PD bank or outlet when you are done.
- 100W fast charging: The cable delivers up to 100W, with the D-tap side rated 12 to 16.8V at 10A and the USB-C side 3 to 20V at 5A, which shortens battery charging time and holds up power-hungry devices through a long session.
- Multiple fast-charge protocols: Support for FCP, AFC, SCP, DRP, Try.SRC, PD3.0, QC2.0, and QC3.0 means the cable negotiates the right fast-charging mode with a wide range of devices and power sources.
- Built-in protection system: An intelligent BMS control circuit guards against overcharge, overcurrent, and overvoltage, so your battery and connected gear are protected while power moves in either direction.
Specifications
| Specification | Detail |
|---|---|
| Connectors | D-tap to USB-C, connecting a V-mount or Gold-mount battery plate to USB-C devices and sources |
| Direction | Bidirectional, both connectors work as input or output |
| Maximum power | 100W, enough to run a laptop or monitor and to shorten battery recharge times |
| D-tap rating | 12 to 16.8V at 10A, input or output |
| USB-C rating | 3 to 20V at 5A, input or output |
| Fast-charge protocols | FCP, AFC, SCP, DRP, Try.SRC, PD3.0, QC2.0, QC3.0 for broad device compatibility |
| Protection | Built-in BMS with overcharge, overcurrent, and overvoltage protection |
| Cable length | 24 cm (9.5"), a short run to keep a battery-to-device link tidy on a rig or belt |
What's Included
- Alvin's Cables D-Tap to USB-C PD Bidirectional Charger Cable (24 cm)
Original: $92.10
-65%$92.10
$32.23Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Product Description
The Alvin's Cables D-Tap to USB-C PD Bidirectional Charger Cable is a 24 cm two-way power lead for filmmakers and content creators who run V-mount or Gold-mount batteries and want to power USB-C gear from those batteries, or top the batteries back up from a USB-C source.
The cable is short and purposeful, with a D-tap plug on one end that clicks into a battery plate and a USB-C plug on the other. It coils neatly on a belt or in a pouch, and both connectors seat with a firm, positive fit so power stays connected as you move around a set.
Ideal for: Filmmakers, camera operators, and content creators using V-mount or Gold-mount batteries to power a camera, monitor, laptop, or phone, or to recharge those batteries from a USB-C PD power bank or wall adapter.
On a long shoot you often have a large V-mount or Gold-mount battery on the rig but a growing pile of USB-C devices to keep alive, and separate chargers for each mean more kit to carry. This cable answers that by moving power both ways over a single lead, so the battery can run your USB-C gear during the day and be recharged from a USB-C bank or outlet afterwards. The result is one cable that keeps a mixed kit powered from the batteries you already carry.
Key Features
- Bidirectional power: Power flows either way between D-tap and USB-C, so the same cable runs a camera, monitor, laptop, or phone from a V-mount or Gold-mount battery, then recharges that battery from a USB-C PD bank or outlet when you are done.
- 100W fast charging: The cable delivers up to 100W, with the D-tap side rated 12 to 16.8V at 10A and the USB-C side 3 to 20V at 5A, which shortens battery charging time and holds up power-hungry devices through a long session.
- Multiple fast-charge protocols: Support for FCP, AFC, SCP, DRP, Try.SRC, PD3.0, QC2.0, and QC3.0 means the cable negotiates the right fast-charging mode with a wide range of devices and power sources.
- Built-in protection system: An intelligent BMS control circuit guards against overcharge, overcurrent, and overvoltage, so your battery and connected gear are protected while power moves in either direction.
Specifications
| Specification | Detail |
|---|---|
| Connectors | D-tap to USB-C, connecting a V-mount or Gold-mount battery plate to USB-C devices and sources |
| Direction | Bidirectional, both connectors work as input or output |
| Maximum power | 100W, enough to run a laptop or monitor and to shorten battery recharge times |
| D-tap rating | 12 to 16.8V at 10A, input or output |
| USB-C rating | 3 to 20V at 5A, input or output |
| Fast-charge protocols | FCP, AFC, SCP, DRP, Try.SRC, PD3.0, QC2.0, QC3.0 for broad device compatibility |
| Protection | Built-in BMS with overcharge, overcurrent, and overvoltage protection |
| Cable length | 24 cm (9.5"), a short run to keep a battery-to-device link tidy on a rig or belt |
What's Included
- Alvin's Cables D-Tap to USB-C PD Bidirectional Charger Cable (24 cm)
