Alvins Cables 8K 2.1 Full HDMI Cable Ultrathin 45cm / Straight-Straight

Product Description

The Alvin's Cables 8K Ultra-Thin HDMI 2.1 Cable is a 45 cm full-size HDMI lead for videographers who need to feed a camera such as a Canon C70, Z CAM, or Sony A7S III into an external recorder or monitor like the Atomos Ninja V without dropped frames.

The cable is strikingly slim and supple, with a soft TPE jacket over a coaxial core just 2.4 mm across. It bends readily around a tight rig, resists knotting, and springs back rather than holding a kink. Each aluminium alloy connector shell seats firmly into its port, and a moulded strain relief at both ends flexes with the cable where it meets the plug.

Ideal for: Videographers recording from cameras like the Canon C70, Z CAM, or Sony A7S III, A9, and A7 IV into an on-set recorder or monitor such as the Atomos Ninja V.

A thick, stiff HDMI cable pulls at the camera's port on a moving rig and can knot or crack at the joints over time, and any signal loss shows up as dropped frames or a flashing screen on the recorder. This cable answers that with an ultrathin, flexible coaxial body and double-layer shielding, so it sits lightly on the port while carrying a clean 4K or 6K feed to the recorder. The 45 cm length gives a little more slack for a monitor mounted further along the rig while still staying tidy.

Key Features

• Ultrathin flexible TPE coaxial build: The 2.4 mm cable with a 1.87 mm shielded core bends easily and resists knotting and breaking, so it routes cleanly through a tight rig and puts little strain on the camera's HDMI port.
• HDMI 2.1 at up to 48 Gb/s: The full 48 Gb/s of bandwidth carries 8K60 and 4K120 footage, which means monitoring or recording at 4K 60fps and 6K 30fps to a device like the Ninja V passes through without dropped frames.
• Double-layer shielding: Two layers of shielding resist external electromagnetic interference and minimise signal loss, so your recorder feed stays free of flicker and screen flashing on a busy set.
• Aluminium alloy connectors with strain relief: The alloy connector shells add impact resistance and the strain relief at both ends flexes with the cable, so the plugs are less likely to fail at the joint over repeated use.

Specifications

Specification	Detail
Interface	HDMI 2.1, supporting 8K60P, 4K120P, and 1080p 3D for high-resolution recording and monitoring
Connectors	Full-size HDMI male to HDMI male, 19-pin, a standard fit for recorders and monitors
Cable length	45 cm (17.7"), a short run with a little extra slack for a monitor mounted further along the rig
Maximum resolution	7680 x 4320 at 60 Hz (8K60), with support for 3840 x 2160 at 120 Hz
Transmission speed	Up to 48 Gb/s, the full HDMI 2.1 bandwidth for uncompressed high-resolution video
Cable type	Coaxial, 2.4 mm outer diameter with a 1.87 mm shielded core for a slim, bendable profile
Type	Passive cable, no external power required, plug in and go
Jacket	Thermoplastic elastomer (TPE), a flexible sleeve that resists knotting and kinking
Connector housing	Aluminium alloy with strain relief at both ends
Shielding	Double-layer, to resist interference and minimise signal loss

What's Included

• Alvin's Cables 8K Ultra-Thin HDMI 2.1 Cable (45 cm)