Alvins Cables 8K 2.1 Full HDMI Cable 17/28in Braided Coiled Red / Straight-Straight

Product Description

The Alvin's Cables 8K 2.1 Braided Coiled HDMI Cable is a coiled HDMI 2.1 lead for camera operators, studio photographers, and content creators who need a little more reach between a camera and a monitor or recorder while keeping an 8K60 or 4K120 signal stable.

Finished in a deep red braided jacket, the cable has a springy coil that pulls out to length and draws back on itself when you release it, so slack gathers up instead of trailing across your rig. The gold-plated connector heads seat into an HDMI port with a firm, positive fit, and the woven sleeve gives the whole cable a taut, hard-wearing feel in the hand.

Ideal for: On-set camera operators working on rigs and gimbals, studio photographers running tethered monitors, and content creators connecting a camera to an external monitor or recorder.

When the monitor or recorder sits a little further from the camera, a fixed-length lead either falls short or leaves loose cable to sag, catch on arms and clamps, and tug at the port as you reframe. This cable answers that with a coil that extends to reach a monitor mounted further along the rig, then retracts to stay tidy, while the shielding and conductor build keep the high-bandwidth video signal clean where a thinner cable might drop out. The result is a stretchier connection that still holds its picture during a shoot.

Key Features

• Coiled braided design: The cable retracts to about 45.7 cm and stretches to roughly 71.1 cm, so it reaches a monitor mounted a little further from the camera without loose cable snagging on clamps or catching your hands as you pan.
• HDMI 2.1 at up to 48 Gb/s: The full 48 Gb/s of bandwidth carries 8K60 and 4K120 footage, which means high-frame-rate and high-resolution monitoring passes through without the cable becoming the bottleneck in your signal chain.
• Triple-layer shielding: Three layers of shielding wrap the core to hold off interference from nearby wireless units, motors, and power cables, so your monitor feed stays free of flicker and dropouts on a busy set.
• Gold-plated connectors: The gold-plated contacts resist corrosion and keep a steady, low-resistance link over repeated plugging and unplugging, so the connection stays reliable across many shoots.

Specifications

Specification	Detail
Interface	HDMI 2.1, backward compatible with HDMI 2.0, 1.4, and 1.3, so it also runs with older monitors and recorders you may already own
Connectors	HDMI male to HDMI male, a standard full-size fit for most on-camera monitors and field recorders
Cable length	45.7 to 71.1 cm coiled (18 to 28"), enough stretch for a slightly longer camera-to-monitor run while staying tidy
Maximum resolution	7680 x 4320 at 60 Hz (8K60), with headroom for 4K at 120 Hz monitoring
Transmission speed	Up to 48 Gb/s, the full HDMI 2.1 bandwidth for uncompressed high-resolution video
Type	Passive cable, no external power required, plug in and go
Ethernet channel	Yes, carries the HDMI Ethernet channel for compatible devices
Conductor	Tinned copper, which resists oxidation and helps maintain a clean signal over the cable's life
Connector plating	Gold-plated contacts for corrosion resistance and a stable connection
Shielding	Triple-layer, to reduce electromagnetic interference on set
Jacket	Braided sleeve for abrasion resistance and a firm, coiled body
Colour	Red

What's Included

• Alvin's Cables 8K 2.1 Braided Coiled HDMI Cable (Red, 45.7 to 71.1 cm coiled)